BeBook Mini Firmware

This is the instruction page for installing BeBook 'Mini' ( 5" screen ) Firmware.

download bebook mini firmware update

Before you start

  • BACKUP/COPY ALL CONTENT FROM YOUR BEBOOK TO YOUR PC!!
  • MAKE SURE YOUR BEBOOK IS FULLY CHARGED

Changes 

  • Improved battery power management.
  • Improved parser for PDF.
  • Improved menu layout.
  • Minor changes in some items.
  • Minor adjustments and additions in license texts.

Install

  1. Download the update: HERE
  2. Check the filesize of the downloaded file. v5setup.nl.july2010.zip should be : 114 MB (To check : right click the downloaded file and choose : "properties" it will show the actual size. Don't use the update if the filesize is different.)
  3. Unpack the v5setup.nl.july2010.zip file using WinZip. (free trial versions: http://www.winzip.com ); The filesize of the unpacked file (v5setup.bin) should be 130 MB.
  4. Copy the unpacked file 'v5setup.bin' onto the root of an SD card. (SD cardsize should be larger than 128MB, but no greater than 2GB.)
  5. Turn off the BeBook
  6. Insert the SD card into the BeBook 'Mini'.
  7. Press and hold the NEXT PAGE button at the left side of the BeBook. Then turn on the BeBook 'Mini'.
  8. When the update interface appears, press the "OK" Button to start and wait until it's finished.
  9. Restart the BeBook.
Done!